W24S-140 4-roll Hydraulic Profile Bending Machine

Description

Hydraulic Profile Bending Machine
W24-140 4-roll Section Bending Machine

W24S-140 4-roll Profile Bending Machine ( Section Bending Machine ) is a hydraulic four-section Section Bending Machine. It is used to roll steel sections into circular, circular and spiral shapes.

It can be used to complete pre-bending, rolling, and rounding operations at a time.

W24S-140 4-roll Profile Bending Machine ( Section Bending Machine ) The upper roller is a fixed roller, the lower roller can be moved laterally, and the profile can be clamped by applying pressure through the cylinder. Left and right sides of the roller can be moved laterally, and pressure can be applied through the cylinder to achieve profile pressing.

The winding circle is driven by the motor driving the four drive shafts through the reduction gear box. BR140 4-roll Section Bending Machine The upper and lower left and right four work rolls are the main drive rolls.

Through the cylinder pressure, the tie roller clamps the steel to effectively overcome the slippage phenomenon when the profile is rolled.

The digital display device can display the real-time rolling state of the material, and is particularly suitable for large-volume rolling of the same size steel.

Easy to display, data at a glance. High processing efficiency, convenient and quick operation.

The W24S-140 4-roll Profile Bending Machine ( Section Bending Machine ) is equipped with a roller device that is mechanically driven.

The rollers can be lifted and rotated to facilitate the correcting of various asymmetric section profiles.

4-Roll Profile Bending Machine Specifications

bar profiles bent hard way Max.Section(mm): 150×30 bar profiles bent easy way Max.Section(mm): 250×40
Min.bending DIA(mm): Φ1500 Min.bending DIA(mm): Φ1000
bent square bar profiles Max.Section(mm): 80×80 bent pipe profiles Max.Section(mm): Φ170×6
Min.bending DIA(mm): Φ1500 Min.bending DIA(mm): Φ2000
bent square tube profile Max.Section(mm): 120x120x8 angle profile bending toes-in Max.Section(mm): 140x140x14
Min.bending DIA(mm): Φ3000 Min.bending DIA(mm): Φ1500
angle profile bending toes-out Max.Section(mm): 140x140x14 channel profiles bending toes-in Max.Section(mm): 300
Min.bending DIA(mm): Φ1500 Min.bending DIA(mm): Φ1200
channel profiles bending toes-out Max.Section(mm): 300 bent tee profile Max.Section(mm): 130x130x15
Min.bending DIA(mm): Φ1200 Min.bending DIA(mm): Φ1500
bent I-beam profiles Max.Section(mm): 300 bent H-beam profiles Max.Section(mm): 160
Min.bending DIA(mm): Φ1200 Min.bending DIA(mm) Φ6000
Sectional modulus cm3: 75-140 Bending speed: 6 Meters/Minute
Material yield limit(Mpa): 250 Motor power (KW): 15

Important link

List of our products:profile bending machine
Must know section bending information:practical guide to the section bending of various metal profiles