Pipe bending machine
From the tightest bend to the broadest, BIT serise pipe bending machines's bending processes produce little to no distortion or ovality.It work with almost all grades of carbon steel pipe and aluminum pipe. We can bend full and half pipe with equal quality and precision.
Our pipe benders can easily do large sweeps and can, indeed, bend any size radius except very tight bends. W24S-800 profile bending machines can bend up to 26” OD pipe. BIT serise pipe bending machines dies that match the OD of the pipe to be bent, but do not require a separate die for each radius that the pipe is to be bent to.
BIT serise pipe bending machines can pre-bending the end of profile, remaining straight edge is less than or equal to two times of the profile width. All three working rollers are drive roller, and adopt the rolling friction; it is high efficiency, energy saving.
1.Main roller rotation is driven by the hydraulic motor through hydraulic system.
Two side rollers(left roller and right roller) are driven by a hydraulic cylinders, rotating in arc line around the main roller, its function is profiles bending; moreover hydraulic system drive hydraulic motor, the hydraulic motor drive gear, the gear drive side rollers and chain, the chain drive main roller rotating with side rollers, its function is profiles bending and forming; the supporting roller can be lift up and down, moved forward and back, and rotated, all these movement were driven by hydraulic cylinder, supporting roller’s function is prevent profiles twisting during bending it, ensuring the accuracy of the work piece.
2. All movements of machine are driven by the hydraulic system, controlled by centralized electric control system, user operate machine through the button on the electric control cabinet.
3.Note: during the process of rolling, the user should not rotate three rollers and lift the supporting rollers at the same time, in order to avoid machine failure. After three rollers are installed with molds, supporting rollers can be lift up and down.
4. Bending range
The Angle bending machine ( profiles bending machine ) can bend various profiles by replacing or adjusting mold.
Please refer to the basic parameters regarding various profiles bending size and range.
5.Profiles bending mold and mold combination
Profiles bending mold and mold combination is designed as per customer’s profiles; the type and specification of the bending section is different, the mold are different.
The numbers on mold diagram are same as the numbers on the mold, installing the mold as per number on mold diagram
1 set of standard hardened and ground rolls (special steel)
All rolls Planetary/Gear – Hydro motor Driven
Side supports are suitable for angle iron bending leg in -Leg Out
Portable control panel
Horizontal and Vertical optional
Body constructed of stress-relieved steel
Overload protection on hydraulic and electrical systems
Bottom rolls hydraulically adjustable with digital readout
Full function,various profile can be bent by replace the mold
NC or CNC can optional by customer
Pipe Bending Machine Video:
600 Pipe bending machine