W24s-180 Profile bending machine
W24-180 Angle Roller Specification
|Min.bending DIA(mm):||Φ1500||Min.bending DIA(mm):||Φ900|
|Min.bending DIA(mm):||Φ1600||Min.bending DIA(mm):||Φ2500|
|Min.bending DIA(mm):||Φ5000||Min.bending DIA(mm):||Φ1800|
|Min.bending DIA(mm):||Φ3000||Min.bending DIA(mm):||Φ2000|
|Min.bending DIA(mm):||Φ2000||Min.bending DIA(mm):||Φ2000|
|Sectional modulus cm3:||140-180||Bending speed:||6 Meters/Minute|
|Material yield limit(Mpa):||250||Motor power (KW):||15|
Arc down-type 3-roll Angle Roller ( Section Bending Machine ), the bed for the steel structure, to eliminate the internal stress treatment, the main roller transmission through the hydraulic system through the hydraulic motor, gear, sprocket transmission to the power to do the rotating movement. The two side rollers make arc-type movement around the center axis.
Through the hydraulic system, the power transmitted by the hydraulic motor, gear, and the main roller simultaneously perform the rotation movement.
The idler is installed on the side roller, so that the idler roller is carried along with the side roller at the same time. Arc movement to ensure the accuracy of rolled profiles.
According to the requirements of the site and profile, it can be installed vertically or horizontally.
BR180 Angle Roller ( Section Bending Machine ) with the bending function of profiles, three working rollers are mainly driven rollers, through the hydraulic motor, gear to achieve, the two rollers for the hydraulic drive, the two rollers can be around the fixed rotary center to do arc movements, work rolls on both sides of the roll and Correction Guide roll device, to ensure that asymmetric section (such as Angle steel) The quality of the profile roll.
1. The equipment has the advantages of small volume, compact structure, reliable performance and convenient operation and maintenance.
2. With the bending function of the end of the profile, once the material is not turned around to complete the workpiece bending molding;
3. Structure form; three-roll arc type;
4. Equipped with independent mobile console, easy to operate;
BR180 Angle Roller is mainly composed of bed part, side roll part, idler part, transmission part, electrical part and hydraulic system, mold and so on.
The BR180 Angle Roller Machine is the introduction of foreign technology production of arc three-roll profile bending machine, with profile bending function,
Three work rolls are the main driving rollers, which are realized by hydraulic motor and gear.
Two lower roll up and down to hydraulic transmission, two lower roll can be around the fixed center of rotation to do arc lifting movement
On both sides of the work roll, there is a roller and a straightening roller device, which is beneficial to ensure the quality of the unsymmetrical section (such as the angle steel).
Uses of BR 180 angle roller:
Heavy metal frame works,Highway and rail transit construction,Shipbuilding,City furniture,Small and medium-sized steel production,auto industry,Agriculture and animal husbandry facilities,Air conditioning and refrigeration industry,Renewable energy industry,Construction machinery industry,Playground facilities.
|Main motor||Shanghai Lichao/ Jiangsu Yuanzhong|
|Work roll bearing||ZWZ bearing|
|Lubrication Systems||Shanghai Ansheng、Huadong Lubrication|
|Air switch、Contactor, etc.||Chint|
|Hydraulic Valves||Yuci “YUKEN”|
|PLC system||Japan, Omron|
|Hydraulic pump||Hefei Changyuan|
|Main cylinder Seals||Taiwan, DingZing|
|Side roller lifting speed||~1.6m/min|
|Oil pump motor||15Kw|
|Diameter of shaft||Upper shaft φ200, lower shaft φ180|
|Standard roller diameter||Φ520mm|