Section Bending Machine

3-Roll List

4-Roll List

Selection parameter table

If the bending section you need is larger than the size in the chart, please contact us. The maximum section modulus of BIT can reach 1000CM3.

WQJ-400/WQJY Profile Bending Machine Specification

  bar profiles bent easy way bar profiles bent hard way square bar profiles bent round bar profiles bent pipe profiles bent pipe profiles bent rectangular tube profiles bent square tube profile bent angle profile bent toes out angle profile bent toes in tee profile bent toes out tee profile bent toes in
Max.Section(mm): 50×10 80×15 30×30  Ø30  1½”x2.9 Ø60×1.5 50x30x3 40×3 40x40x5 35x35x5 50×6 50×6
Min.Section(mm): 20×6 30×6 10×10 Ø10 ¼”x1.8 Ø25×1.5 40x20x2 30×2 30x30x4 30x30x4 20×3 20×3
Model

W24S Profile Bending Machine Specification

  16 45 75 140 180 250 320 400 500 600
bar profiles bent hard way Max.Section(mm) 80×10 100×25 120×25 150×30 175×40 200×50 250×70 250×70 300×70 300×80
Min.bending DIA(mm) Φ800 Φ700 Φ1000 Φ1500 Φ1500 Φ2500 Φ3500 Φ3500 Φ4000 Φ5000
bar profiles bent easy way Max.Section(mm) 180×20 200×35 250×30 250×40 350×50 400×60 450×70 500×80 500×100 650×100
Min.bending DIA(mm) Φ1500 Φ600 Φ1000 Φ1000 Φ900 Φ2000 Φ1000 Φ1200 Φ1600 Φ2000
square bar profiles bent Max.Section(mm) 50×50 60×60 70×70 80×80 110×110 130×130 145×145 165×165 200×200 240×240
Min.bending DIA(mm) Φ500 Φ600 Φ800 Φ1500 Φ1600 Φ2000 Φ2500 Φ3000 Φ3500 Φ4000
pipe profiles bent Max.Section(mm) Φ76×4 Φ102×4 Φ140×4 Φ170×6 Φ219×6 Φ245×8 Φ325×8 Φ400×8 Φ452×10 Φ510×20
Min.bending DIA(mm) Φ700 Φ1000 Φ1800 Φ2000 Φ2500 Φ3000 Φ4000 Φ8000 Φ8000 Φ10000
square tube profile bent Max.Section(mm) 65x65x6 90x90x5 100x100x6 120x120x8 150x150x8 180x180x10 200x200x10 250x250x12 300x300x12 350x350x12
Min.bending DIA(mm) Φ1000 Φ1500 Φ2000 Φ3000 Φ5000 Φ6000 Φ8000 Φ10000 Φ15000 Φ30000
angle profile bent toes in Max.Section(mm) 80x80x10 100x100x12 120x120x12 140x140x14 160x160x20 180x180x12 200x200x20 200x200x28 200x200x30 200x200x30
Min.bending DIA(mm) Φ1000 Φ1200 Φ1500 Φ1500 Φ1800 Φ3000 Φ4000 Φ4000 Φ4500 Φ4500
angle profile bent toes out Max.Section(mm) 80x80x10 100x100x12 120x120x12 140x140x14 160x160x20 180x180x12 200x200x20 200x200x28 200x200x30 200x200x30
Min.bending DIA(mm) Φ1500 Φ2000 Φ2000 Φ2500 Φ3000 Φ4000 Φ4500 Φ6000 Φ8000 Φ8000
channel profile bent toes in Max.Section(mm) 120 140 200 300 360 450 500 550 600 700
Min.bending DIA(mm) Φ600 Φ600 Φ1000 Φ1200 Φ2000 Φ2500 Φ3000 Φ4000 Φ5000 Φ6000
channel profile bent toes out Max.Section(mm) 120 140 200 300 360 450 500 550 600 700
Min.bending DIA(mm) Φ600 Φ600 Φ1000 Φ1200 Φ2000 Φ2500 Φ3000 Φ4000 Φ5000 Φ6000
tee profile bent Max.Section(mm) 80x80x9 80x80x10 100x100x10 130x130x15 150x150x20 180x180x20 200x200x20 250x250x30 300x300x30 350x350x35
Min.bending DIA(mm) Φ700 Φ800 Φ1000 Φ1500 Φ2000 Φ3000 Φ3000 Φ4000 Φ4000 Φ5000
I beam profiles bent.jpg Max.Section(mm) 120 140 200 300 360 450 500 550 600 700
Min.bending DIA(mm) Φ600 Φ600 Φ1000 Φ1200 Φ2000 Φ2500 Φ3000 Φ4000 Φ5000 Φ6000
H beam profiles bent.jpg Max.Section(mm)     120 160 200 240 320 400 450 500
Min.bending DIA(mm)     Φ4000 Φ6000 Φ9000 Φ15000 Φ32000 Φ35000 Φ40000 Φ40000
Sectional modulus cm 3 10-20 16-45 45-75 75-140 140-180 180-250 250-320 320-400 400-500 500-600
Motor power 5.5 11 11 15 18.5 22 30 37 37 45

What is section bending machine

Section bending machine (section bender) is also called profile bending machine,it is a kind of highly effective section bending equipment which especially used in various of special sections, such as iron angle (angle bending machine), channel, round & square bar, ,H& I beam, teel, pipe, square & rectangal tube and so on.
Depending upon your unique project requirements, Profile bending may be performed on a variety of materials, including carbon steel, stainless steel, aluminum, titanium, and copper.

Double pinch machines

BIT series 3-roller profile bending machines is driven by 3-roller rotation making it possible to make a high-sectional modulus bending process a reality.

The 3-roller drive can minimize material slippage during the bending process, while the bottom two are hydraulically driven and they can move independently of each other, permitting to bending symmetrically and asymmetrically.

Therefore, compared with the top roller driven machine, the function of our machine enhances the operator’s ability and provides the opportunity to perform the pre-bending process on both edges.

Click here: Three different types of machines.Single pinch machines,Pyramidal machines,Double-pinch machines

Features

The machine in the photo above is a W24S-180 profile bending machine for pipe bending (we can also call it a pipe bending machine) customized for a Malaysian tower production company.

Profile bending roller bracket
Profile bending roller supports, each of our profile bending machines has three sets of strong roller sleeves. It makes us pay relatively more for the cost of a set of roller sleeves, but it will improve the accuracy and stability of the section bending process, which is a production cost worth paying.
BIT profile bending machine body internal support
Like all the profile bending machines we produce, there is a reinforced support hidden inside the fuselage, which provides reliable section bending stability during the bending process.
Profile bending machine hydraulic system
BIT profile bending machine equipped with 8 sets of hydraulic drive elements as standard (the ninth set can be customized for H-beam profiles bending). Compared with the popular 4 to 6 sets of hydraulic elements in the Chinese market, it makes bending more convenient and ensures the accuracy of section bending.
Combined die for BIT profile bending machine
The specially developed combination mould for profile bending allows customers to easily bend bars, angle, channel, H-beamsI-beam, square and rectangular metal tubes and tees without paying extra money. Note: The bending of circular pipes requires additional customized molds of corresponding dimensions.
auxiliary roller system
Up, down, left, right, front and back six directions can be controlled to move the auxiliary roller system

3D guide-roller controlled by hydraulic cylinder,Up, down, left, right, front and back six directions can be controlled to move the auxiliary roller system.Ensure the best control of the flatness of the rolling and correct the deformation generated during the rolling process of the profile.

How to choose a profile bending machine?

Please find the right model according to the maximum bending sectional modulus of profiles in the following parameter table.

The main parameters on form means the max. bending capacity with best working efficiency. If other steel profile like square, angle, only if the bending sectional modulus less than 75 cm3, then it is available to finish bending on this 75.learn more: What is the section modulus

You can also choose the required model according to the bending material:Square Bar (square steel), Round BarFlat Bar (flat steel), Equal AngleUnequal AngleTeeschannel steel , H & I Beams , Round Tube , Square Tube

Section bending machine Cost and section bender Price

Our section bending machine price is lower than our peers’, and our section bender is high quality, we have our own manufacturing factory, all products are factory price, there is absolutely no middleman markup, we accept both small bender (W24S-6) customer and large bender (W24S-600) wholesale customer, section bending machines and angle bending machines for sale online.

If you have any questions, please contact us by email, we can give you efficient solution and low cost quotation, your inquiry will be highly appreciated.

Important link

List of our products:profile bending machine
Must know section bending information:practical guide to the section bending of various metal profiles