section bending machine

Profile bending machine
Angle & Section Bending Machine
Manufacturer

Home >> Bending profiles & Section bending >> >>Section Bending Equal Angle

Section Bending Equal Angle

What is section bending equal angle?

Angles are often used in tank stiffeners, matching flanges, curved lintels, hand rails, lagging rings, form work and fabricated roof trusses.

Depending upon your unique project requirements, Profile Bending angle bending may be performed on a variety of materials, including carbon steel, stainless steel, aluminum, titanium, and copper.

ModelToe InToe Out
Specification (mm)Minimum Inside Diameter (mm)Specification (mm)Minimum Inside Diameter (mm)
W24S-1680 × 80 × 10100080 × 80 × 101500
W24S-45100 × 100 × 121200100 × 100 × 122000
W24S-75120 × 120 × 121500120 × 120 × 122000
W24S-140150 × 150 × 81500150 × 150 × 82500
W24S-180140 × 140 × 141800140 × 140 × 143000
W24S-250180 × 180 × 123000180 × 180 × 124000
W24S-320200 × 200 × 204000200 × 200 × 204500
W24S-400200 × 200 × 284000200 × 200 × 286000
W24S-500200 × 200 × 304500200 × 200 × 308000
W24S-600200 × 200 × 304500200 × 200 × 308000

Bending profiles equal angle

BIT series profile bending machine can bend all sizes of angle that the mill produces, up to "200 x200 x 30”. The first two numbers in angle specify the length of each leg. The third number specifies the thickness of the angle.

Can also bend all types of angle as well; including aluminum, stainless and carbon steel. Carbon angle (mill produced) is classified as ASTM A36 resulting in a yield point (PSI) of 36,000 minimum.

Angle Bending Tolerances

Angle is produced with equal legs and unequal legs. Unequal legs would measure differently on the horizontal leg versus the vertical leg.

BIT series profile bending machine can ability to bend angle with the leg in, leg out, heel in, heel out and heel up.

Its also have the ability to bend bulb flat. Bulb flat is similar to angle with one of the legs cut down to a very short "stub". Section bending machine can bend bulb flat with the stem out and the stem in.

Bent angle can be used for many different applications. The most common application would be angle flanges which are full circles that are used to join sections of pipe together. Bent angle is also used for canopies, roof trusses and tunnel shoring applications.