section bending machine

Profile bending machine
Angle & Section Bending Machine
Manufacturer

Section Bending Square Bar

What is section bending bar?

BIT Series Profile Bending Machine can bent square bar for trummle screen rings, architectural features, artistic works among others. Often square bar is machined after bending as an affordable alternative to cutting shapes from plate.

 Specification (mm)Minimum Inside Diameter (mm)
W24S-1650 × 50500
W24S-4560 × 60600
W24S-7570 × 70800
W24S-14080 × 801500
W24S-180110× 1101600
W24S-250130 × 1302000
W24S-320145 × 1452500
W24S-400165 × 1653000
W24S-500200 × 2003500
W24S-600240 × 2404000

Bending profiles bar

Bar materials can come in various shapes and sizes. BIT Series Profile Bending Machine can be ability to bend round bar, square bar and flat bar. All of these shapes are solid.

Bars can be bent with virtually every bending process we have available with our Section Bending Machine. For very tight radius bending you can utilize a draw bending process where you must be pull the material (draw the material) around a bend die matching the desired bend radius. For larger or sweeping radii you will utilize a roll bending process or plate roll.

BIT Series Profile Bending Machine can bend all types of bar including aluminum, stainless and carbon steel.

Bars are formed by either a cold drawn process or a hot drawn process. The different processes result in different material properties which are defined by local mills that are producing bars. Hot rolled bars are typically designated as A36 with a yield point (PSI) of 36,000 minimum. Cold rolled bars are typically designated as 1018 with a yield point (PSI) of 54,000 minimum.

Square bars can only be bent as one style (i.e. there is no strong axis or weak axis to bend against). BIT Series Profile Bending Machine can ability to bend all mill produces sizes of square and round bars.

Bars are most commonly used for smaller manufactured parts and for industrial applications.